Muscle Gloss is a two-component product that when mixed together forms a 100% solids epoxy floor sealer, which is more durable, glossy and longer lasting than a water based or solvent based epoxy. Our easy drop system offers our customers the most user friendly epoxy system on the market today. Muscle Gloss is chemically resistant, easy to maintain, and an extremely durable coating for any application!

We are very happy to offer our customers what we call a "drop system". What this means is there is no measuring of the ratio for your part A and part B. Simply pour part B into the part A and pour the entire contents onto the floor right away.

Both, for best results first squeegee out the area you are working with, than follow with a rolling into the concrete.

There are a couple different ways, first it is highly recommended too wear spike shoes during the application of the epoxy and the Muscle Fleck. The shoes allow you to walk on the wet epoxy during the fleck application. You can broadcast by hand or use a hand held seed spreader for a more even broadcast.

Floor preparation is crucial to the proper installation of Muscle Gloss. The Muscle Gloss epoxy coating will not be able to penetrate and bond to concrete in areas where oil or fluid contamination has occurred. A spauld or worn floor may have loose mortar and/or an insufficient profile to assure proper epoxy bonding. The use of MuscleClean and MusclePrep will remove many of the contaminants and also provide a profile to the concrete floor.

Muscle Gloss is not recommended for application over existing coatings because the existing coating will inhibit bonding of the Muscle Gloss epoxy coating to the concrete floor. Floors that have existing coatings should be stripped, etched or shot blasted to remove as much of the coating as possible. In cases where the coating cannot be removed, a sanding of the floor can provide a "profile" for the Muscle Gloss to adhere to.

Muscle Gloss should be flecked to provide a non-slip surface to the coating. Muscle Gloss forms an extremely hard and smooth surface that can become slippery when wet MuscleFleck provides extra protection for your new garage floor.

Yes, Muscle Gloss can be scratched if heavy objects are dragged across its surface, however, under normal conditions Muscle Gloss should not scratch.

Ultraviolet radiation (a component of sunlight) will cause most coatings and to blush or fade. Muscle Gloss however, contains an ultraviolet inhibitor that reduces the damaging effects of sunlight to the finish.

Tires heated from normal driving will not affect the Muscle Gloss finish. Muscle Gloss can be affected by the deliberate spinning of tires on the surface.

You will have around 30 minutes too work with the Muscle Gloss once the A and B are mixed. In theory it should only take around 10-15 minutes to apply Muscle Gloss per kit.

Yes, the prep work is crucial to the proper installation of Muscle Gloss. Areas that are not properly prepared will having bonding issues which may cause the epoxy to lift or peel. It is vital that your substrate have a rough, clean surface for the Muscle Gloss to adhere too. The prep work is the Most important part of the entire application.

You will want to remove as much of the coating as possible, we offer a product called Muscle Strip that should take off any existing coatings.